1. Phoenix LT4
1.1. Phoenix LT-4 Combination Lane Machine Error code: 4 (INTERNAL ERROR)
Environment:
Lane Machine Control Box
Applicable Version(s):
All
Issue:
Error code:4
Cause:
Interruption of communication inside the control box between the logic and relay boards.
Solution:
If this error occurs, turn the power switch off then on. If the error is cleared the machine is okay for operation. If the problem persists follow these instructions in the attached document.
Applicable Files:
'LT4 Error Code_4 Troubleshoot.pdf'
Related Information and Links:
Revision Date:
10/26/2018 - Released to KB

 
1.2. Phoenix LT4 not Conditioning

Environment:
Phoenix LT4 Lane Machine
Applicable Version(s):
All LT4 Lane Machines
Procedure:

The Phoenix Lite LT4 lane machine can suddenly stop conditioning. This issue may occur if the tank was removed (for cleaning or changing wicks) and reinstalled incorrectly in the machine.

The tank must be mounted correctly on the support tube so that it rests properly against the transfer roller. An improperly mounted tank will ultimately result in the conditioner not being applied to the lane surface. It is possible to align the tank with its retaining bracket, yet still install the tank incorrectly. Refer to Figures 1 and 2.



It is easiest to check for proper mounting with the machine in the upright or storage position. In this position you can see the bottom of the oil tank and the support tube that it is resting on. 
Revision Date:
3/17/16 - Released to KB